Categories

Search

Products search
Fewer search options More search options
128 products found
Items: 112 of 128, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart The product is unavailable in the catalog

    Hanna Pipettor 2000UL; for use with Hanna Pipette Tips (HAN-HI731352)

    • CA$195.00

    Not rated yet
    • CA$195.00
  • Drag and drop me to the cart The product is unavailable in the catalog

    HI70300L is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH electrode hydrated. Ideally a storage solution should be used; never store an electrode in distilled or deionized water. The Hanna Instruments storage solution is specifically formulated to minimize microbial growth and to prevent any effects of diffusion/osmotic from storing a probe in a solution with the highly concentrated inner reference electrolyte. Storing your pH and/or ORP electrodes in a storage solution will also keep the junction clear. Maintaining the hydrated layer and clear junction will help to ensure a fast and reliable measurement. In the case of cleaning your pH electrode in one of our cleaning solutions, we recommend soaking the electrode in the HI70300L storage solution for at least one hour before taking measurements.

    • Special formulation to minimize microbial growth and osmotic/diffusion effects between the solution and inner reference electrolyte
    • Manufactured specifically for pH and ORP electrodes
    • Clearly marked expiration date and lot number
    • CA$23.50

    Not rated yet
    • CA$23.50
  • Drag and drop me to the cart The product is unavailable in the catalog

    HI7082 is a pH and ORP electrode fill solution that contains 3.5M KCl, which is specifically produced for double junction electrodes. The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure optimum performance. This simple maintenance helps guarantee adequate head pressure to promote the flow of reference electrolyte into the sample being measured.

    • Fill solution for double junction pH & ORP electrodes
    • Convenient 30 mL bottles
    • Clearly marked bottle with expiration date and lot number
    • CA$24.00

    Not rated yet
    • CA$24.00
  • Drag and drop me to the cart The product is unavailable in the catalog

    The HI70635L is a highly effective cleaning solution that is specially formulated for use with pH electrodes that become coated with wine juice and must deposits. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and prevent any clogging of the junction. Measuring the pH in wine is a critical step ensuring the quality of the final product, for more information read our ebook.

    Hanna’s line of cleaning solutions have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.

    • Specially formulated cleaning solution to remove wine deposits from a pH electrode
    • Air tight bottle with tamper-proof seal to ensure quality
    • Expiration date and lot number clearly marked on the bottle
    • CA$49.00

    Not rated yet
    • CA$49.00
  • Drag and drop me to the cart The product is unavailable in the catalog

    The HI84102 is an automatic mini titrator for titratable acidity in wine. The HI84102-50 is the titrant solution to be used with the HI84102. The titrant is pre-standardized eliminating the need for any volumetric glassware or a analytical balance. The HI84102 with the prepared HI84102-50 makes titratable acidity titrations fast, accurate, and simple to perform.

    • Pre-standardized titrant
    • Clearly marked expiration date and lot number
    • Air tight bottle with tamper-proof seal to ensure quality
    • CA$39.50

    Not rated yet
    • CA$39.50
  • Drag and drop me to the cart The product is unavailable in the catalog

    Hanna's pHep®5 waterproof tester is an advanced pH meter that has many features found in more expensive portable and benchtop meters. This ergonomic meter measures from -2.00 to 16.00 pH with an accuracy of ±0.05 pH. pHep®5 features automatic one or two-point calibration to known buffer, automatic temperature compensation. The large multi level LCD display shows both pH and temperature readings simultaneously, while a stability indicator is displayed to alert the user when a stable reading has been obtained. The pHep®5 tester also features a replaceable pH probe that has a unique extendable cloth junction to clear any clogging that occurs.

    • Waterproof
    • Replaceable pH Electrode 
    • Automatic up to Three-Point pH Calibration
    • CA$160.00

    Not rated yet
    • CA$160.00
  • Drag and drop me to the cart The product is unavailable in the catalog

    The HI73127 is a spare pH tester electrode that is compatible with: HI98129, and HI98130 Combo multiparameter testers, HI98127 and HI98128 pHep® testers, and HI98121 ORP tester. These meters also use HI73127 replaceable electrode that has a stainless steel round connector and extendable cloth junction. This cartridge design has no pins to line up or that can break.

    • CA$89.50

    Not rated yet
    • CA$89.50
  • Drag and drop me to the cart The product is unavailable in the catalog

    The HI84100-55 is a 500 mL bottle of pump calibration standard that is used to calibrate the dosing system of the HI84100 Sulfur Dioxide Mini Titrator for Wine Analysis.*

    A calibrated dosing pump allows for the accurate determination of the amount of titrant used when performing a titration. The amount of volume dosed along with the concentration of the titrant is used by the pre-programmed formula within the HI84100 in determining the exact concentration of sulfur dioxide. The pump calibration procedure should be performed anytime the titrant or ORP electrode is replaced.

    *The HI84100 Sulfur Dioxide Mini Titrator has been discontinued. The new version is the HI84500 Sulfur Dioxide Mini Titrator for Wine Analysis which has its own set of reagents.

    • Standardized solution
    • Clearly marked expiration date and lot number
    • Air tight bottle with tamper-proof seal
    • CA$57.00

    Not rated yet
    • CA$57.00
  • Drag and drop me to the cart The product is unavailable in the catalog

    The HI84100-52 is a 500 mL bottle of acid reagent required for determination of total sulfur dioxide in wine using the HI84100 Sulfur Dioxide Mini Titrator for Wine Analysis.* 

    This acid reagent is used to lower the pH value of the sample prior to performing a titration. With 5 mL of reagent required per test, there is enough acid reagent for 100 tests.

    *The HI84100 Sulfur Dioxide Mini Titrator has been discontinued. The new version is the HI84500 Sulfur Dioxide Mini Titrator for Wine Analysis which has its own set of reagents.

    • Pre-measured solution
    • Clearly marked expiration date and lot number
    • Air tight bottle with tamper-proof seal
    • CA$39.50

    Not rated yet
    • CA$39.50
  • Drag and drop me to the cart The product is unavailable in the catalog

    The HI84100-54 are packets of stabilizer reagent required for determination of sulfur dioxide in wine using the HI84100 Sulfur Dioxide Mini Titrator for Wine Analysis.*

    The stabilizer packets are used to convert iodate into iodine, which in turn reacts with sulfur dioxide. The HI84100-54 powder is packaged into single use packets that are emptied into the sample prior to performing the titration.

    *The HI84100 Sulfur Dioxide Mini Titrator has been discontinued. The new version is the HI84500 Sulfur Dioxide Mini Titrator for Wine Analysis which has its own set of reagents.

    • Pre-measured packets
    • Clearly marked expiration date and lot number
    • CA$55.00

    Not rated yet
    • CA$55.00
  • Drag and drop me to the cart The product is unavailable in the catalog

    The HI83749 is a portable turbidity meter for the monitoring of protein stability and bentonite in wine. The meter is supplied complete with bentocheck reagent and AMCO-AEPA-1 primary turbidity standards. The bentocheck reagent is used to determine the amount of bentonite required to increase protein stability and the AMCO-AEPA-1 primary turbidity standards are used for calibration and performance verification of the meter.

    • Fast Tracker Tag Identification System (T.I.S)
    • USB for data transfer
    • Operates on batteries or line voltage
    • CA$1408.00

    Not rated yet
    • CA$1408.00
  • Drag and drop me to the cart The product is unavailable in the catalog

    The HI96811 is a rugged, portable digital refractometer designed for sugar measurement of wine, juice and must. The HI96811 reports sugar content as % Brix and has a high accuracy of ±0.2%. The operation of the meter is simplified with only two buttons: one button is to calibrate with distilled or deionized water and the other to take a measurement. All readings are automatically compensated for temperature variations according to the ICUMSA Methods Book standard and displayed within a 1.5 second response time. The sealed flint glass prism and stainless steel well are easy to clean. Just wipe with a soft cloth in preparation for the next sample.

    • Sample size as small as 2 metric drops (100 μl)
    • Sealed stainless steel well with high-grade optical prism made of flint glass
    • Fast 1.5 second response time for temperature compensated readings
    • CA$307.00

    Not rated yet
    • CA$307.00
Items: 112 of 128, per page