Vinmetrica

Replenishes the SO2 reactant supplied with the SC-100A, the SC-100 and the SC-300 Analyzer kits.

Replenishes the SO2 Acid Reagent for the SC-100 and SC-300 kits.

Replenishes the SO2 Titrant provided with the SC-100A and SC-300.

This reagent bottle replenishes the TA titrant (0.133M NaOH) found in the SC-200 and the SC-300 Analyzer kits.

The pH 4.01 Reference solution is for calibrating the SC-200 and the SC-300 Analyzers for pH and TA measurements.

The pH 7 Reference solution is for calibrating the SC-200 and the SC-300 Analyzers.

Turn your winery or garage into a wine laboratory! The Deluxe Lab Accessory Kit is composed of the following accessories:

• The Lab Support Stand
• Vinmetrica’s Electrode holder
• The Double Burette clamp
• The 10 mL glass Burette with Teflon stopcock
• The Magnetic Stirrer
• And a small tube of Burette Detergent

Replacement SO2 probe for the SC-100, SC-100A & SC-300 SO2 Analyzers. Simply rinse with deionized (distilled) water when done with measuring SO2 and let it air dry. The SO2 electrode does not need to be stored in any solution and should last for a long time but be careful not to bend the wires at the end of the electrode.

This electrode has a female BNC end, compatible with the male BNC connector on Analyzers manufactured after Feb 2016. Check your unit! You may need an adapter.

If your unit has a female RCA connector, you need a male BNC x male RCA adapter (30249-2-RCA).

If your unit has a female BNC connector, you need a male BNC x male BNC adapter (30249-2-BNCM).

Replenishes the screw caps, including septa, for the reaction vials and check vial of the Vinmetrica SC-50 MLF Analyzer. Septa should be replaced every 4 uses. Caps can be re-used.

The SC-100A puts you in control of your wine sulfite analysis. Its highly accurate and sensitive titration system conveniently alerts you visually and audibly when the endpoint is detected by its electrode. Because it doesn’t rely on a color change, the SC-100A eliminates the guesswork in Ripper sulfite tests, especially in red wines!

Vinmetrica’s SC-200 Measures pH and TA (Titratable Acidity) levels in wines easily, accurately and quickly. Knowing your pH and your TA parameters is essential during the winemaking process to insure you are making the highest quality wines.

The SC-300 analyzer gives accurate SO2, pH and TA values. Kit includes everything to perform about 50 sulfite tests and 30 TA tests: both electrodes, all reagents, pipettes, syringe and beaker.