SuperJet pump only - Discontinued, see options

Next product

SuperJet pump only - Discontinued, see options

Replacement Flojet pump/motor for the SuperJet filter. Unfortunately, this pump has been discontinued by the manufacturer. We have 1 left which comes with a bare wire - you need to wire on the correct 3-prong plug.

The Super Transfer pump might be a suitable replacement, though it won't mount onto the SuperJet in the same way. See the full description for comparison of the pump specifications.

You do not need to replace your motor if it runs when you turn it on. You may need to change your check valve.

If your pump has no prime, you may need to change the check valve not the motor.

Flojet D48X002B (SuperJet Pump)	Super Transfer Pump
Self-priming to 8’	Self-priming
Diaphragm pump	Diaphragm pump
Auto shut-off at 45 psi	Auto shut-off at 45 psi
Max temperature 60C/140F
Max liquid temperature 60C/140F	Max liquid temperature 54C/130F
Designed for intermittent duty, but can be run continuously for short periods. When it gets near the max thermal limit, let it cool down to ambient temperature.	Can run for 90 minutes. If it gets warm, let it cool down to ambient temperature. Run for shorter periods to avoid overheating.
Single speed	Adjustable flow rate
50/60 hz, 115 v	0.5 amp, 110 volts

There are no comments yet. Be the first to leave a comment

SUPER Filter - Sightglass

SuperJet pump only, with no plug/bare wire end

SuperJet pump only - Discontinued, see options