0 items in cart
The order subtotal is less than the minimum allowed value (CA$1.00)
Wooden base and steel hopper for your Monster Mill MM-2Pro.
Add this hopper/base system to the MM-2Pro Monster Mill, and in a matter of minutes you will be able to mill grains. No fabrication required!
Hopper not quite as shown - the mill side pieces are slightly taller for the MM-2Pro.
Wooden base and steel hopper for your Monster Mill
The hopper is constructed from 20 gauge G90 hot dip galvanized steel that should never rust. The material is more than 35 thousandths thick, and is super strong! The pieces are laser cut, and then CNC bent by our supplier in the USA. The hopper stands 9” tall above the mill, and the opening at the top is 11.5” by 12.75” with a capacity of at least 11 pounds of 2-row or pilsner malt. The hopper design directs the grist down into the mill gap, keeping it both away from the ends of the rollers, and from bouncing out of the gap.
The base is hand fabricated by a cabinet maker from medium density fiber board, and measures just under 12” x 12”. The top edges and corners are radiused for smoothness, and the window for the grist to fall through is hand routed. The base fits over standard 5-6 gallon plastic buckets, and holds the mill frames straight and securely.
© 1989 - 2021 Bosagrape Winery Supplies Ltd.. All rights reserved.
Powered by X-Cart