USES: Steel gondolas, equipment, bottling room walls, conveyors, presses, tank pads, stemmer/crushers, hoists
COVERAGE: 400 square feet per gallon. Depends on porosity of surface.
FINISH: Gloss.
VISCOSITY: Thin liquid.
DRYING TIME: Set to touch 15-30 minutes, recoat 2-4 hours.
SURFACE PREPARATION: Surface should be clean and free of loose paint, etc. Since it contains non-toxic corrosive inhibitors, it can be self priming. Sand surface well.
APPLICATION: Apply by means of brush, roller or spray.
RESISTS: Wine acids, caustic, alcohol. Good toughness.
CAUTION: Industrial product. Keep out of reach of children. Do not apply when air temperature is below 60° F. Store in warm room. Do not spray in confined area without proper ventilation and respirator. Use in well ventilated area.